E600 0.4 kW - 5.5 kW

E600 0.4 kW - 5.5 kW

Best performance/cost ratio, without compromise in reliability and quality
Compact design, easy to integrate in your environment: DIN rail mounting, contactor-style I/O
Easy to setup: Simple set of optimized parameters for all basic functions and applications
PID and HVAC functions - safety integrated - MODBUS - open for networking
Internal EMC filter as standard: Ready for CE market
Economical mass production on high automated and dedicated SMT lines
General purpose drive - made for the worldwide market (CE/UL/CCC)
Approved and certified by European independent bodies

ModelMotor Power (kW)Rated Current Output (A)Structure CodeWeight (kg)Cooling Mode
E600-0004S2Q1U1F2AG03B1R3 0,4 kW 2,5 Q1 0,45 Self-cooling
E600-0007S2Q1U1F2AG03B1R3 0,75 kW 4,5 Q1 0,48 Air-Cooling
E600-0015S2Q1U1F2AG03B1R3 1,5 kW 7,0 Q1 0,49 Air-Cooling
E600-0022S2Q2U1F2AG03B1R3 2,2 kW 10,0 Q2 0,75 Air-Cooling
           
E600-0004T3Q1U1F2AG03B1R3 0,4 kW 1,2 Q1 0,8 Air-Cooling
E600-0007T3Q1U1F2AG03B1R5 0,75 kW 2 Q1 0,82 Air-Cooling
E600-0015T3Q1U1F2AG03B1R5 1,5 kW 4 Q1 0,85 Air-Cooling
E600-0022T3Q2U1F2AG03B1R5 2,2 kW 6,5 Q2 1,3 Air-Cooling
E600-0030T3Q2U1F2AG03B1R3 3 kW 7,6 Q2 1,3 Air-Cooling
E600-0040T3Q2U1F2AG03B1R3 4 kW 9 Q2 1,45 Air-Cooling
E600-0055T3Q2U1F2AG03B1R3 5,5 kW 12 Q2 1,45 Air-Cooling
Power supply
Rated voltage 3 phase 380…460 V +/- 15%
1 phase 200…240 V +/- 15%
Input frequency 44…67 Hz
EMC filter Integrated for 2. environment
Output
Output voltage 0…V-input
Output frequency 0,5…650 Hz
Resolution of output frequency 0,01 Hz
Overload capability 150% - 60 sec. / 10 min
Control-Mode
PWM control-modes V/Hz - Mode
PWM frequency 0,8…6 kHz
V/Hz characteristic Linear, quadratic, and user-programmable curve
Starting torque 100% rated torque at 1 Hz
DC-Brake Frequency threshold, duration and intensity programmable – DC injection
Brake chopper Integrated chopper transistor
Display
7 Segment LED display - 4-digit For programming and visualization of different operating parameters
I/O Channels, control functions
Inverter control - Start/Stop To configure: terminals / operation panel / serial link
Digital control inputs 4 digital inputs (HIGH/LOW configurable)
Speed reference signal Potentiometer, analogue input (terminals 0...10V, (0)4…20 mA),
operating panel keys, serial link
Reference analogue channels 1 Analogue channels 0…10V, (0)4…20 mA
Analogue outputs 1 analogue output channel programmable in gain,
different functions to assign (0…10V)
Digitale outputs 1 digital output (OC, different functions to assign)
Relays output 1 switchover contact 3 A 230 V (programmable for different functions)
Interface Serial link (MODBUS – ASCI/RTU)
Special function - control options Jog mode, 12V / 50 mA auxiliary power supply on terminals PI-control
Protection functions,
incl. fault memory
Electrical protection functions Overvoltage, Undervoltage
Overcurrent, Overload, Motor-Overload, Output-short
Analogue reference interruption
Thermal protection functions Heatsink overtemperature
Optionals
Operating panel Remote keypad
Brake resistors Braking resistors for heavy duty operation
Parameters
Filter / chokes PFC chokes – dv/dt limiting output filter - sinusfilter
Parameter copy stick USB Stick with parameter dublication function
PC-Link Software (via MODBUS) Special tool for programming, control and diagnostic
(parameter set memory)
Safety STO (Q2 only)
Environmental conditions
Protection IP21
Operating temperature -10…+40 °C
Humidity Max. 90 % not condensing, no corrosionї
Elavation 1000 m - 1% derating / 100m above
Vibration Max. 0,5 g
Power range
V/Hz 230V: 0,2...2,2 kW 400V: 0,2…5,5 kW
Standards
ЕМС EN61800-3(2004)
Safety EN61800-5-1 2003
COMPRESSOR
BALL MILL
MINING EXCAVATOR
PACKAGING
PUMP
AIR CONDITION
FAN
VENTILATOR
WASH MACHINE
BIOGAS PLANT
BUILDING AUTOMATION
TEXTIL