EM30 0.4 kW - 11 kW

 

EM30 0.4 kW - 11 kW

High-tech motor control concept, based on advanced DSP- technology V/Hz, SENSORLESS VECTOR with SPEED/TORQUE control, sensorless PMSM synchronous motor control
Intelligent AUTOTUNING functions for easy set-up
Rugged construction, all metal enclosure, thermally decoupled from motor, IP67/NEMA 4, shock proof(4G) – for motor- and wall mounting
Flexible configurable 4 line character LCD display
Ready for all common fieldbus systems
Numerous standard inverter functions, to make it suitable for all kind of industrial and civil applications, and for retrofit as well- integrated PID controller
C3 class EMC filter build in, optional kit for internal C1 class filter available
Smart PC-tools, for inverter control, parametrization and troubleshooting. Parameter COPY-stick
Approved for worldwide standards by independent bodies

ModelMotor power (kW)FramesizeDimensions
(WxHxD-mm)
Remarks
EM30-0004 S2 0,4 kW - 2,5 A J1 186x266x180 1-phase 220V
EM30-0007 S2 0,75 kW - 4,5 A J1 186x266x180 1-phase 220V
EM30-0015 S2 1,5 kW - 7 A J1 186x266x180 1-phase 220V
EM30-0022 S2 2,2 kW - 10 A J1 186x266x180 1-phase 220V
         
EM30-0004 T2 0,4 kW – 2,5 A J1 186x266x180 3-phase 220V
EM30-0007 T2 0,75 kW - 4,5 A J1 186x266x180 3-phase 220V
EM30-0015 T2 1,5 kW - 7 A J1 186x266x180 3-phase 220V
EM30-0022 T2 2,2 kW - 10 A J1 186x266x180 3-phase 220V
         
EM30-0007 T3 0,75 kW – 2 A J1 186x266x180 3-phase 380V
EM30-0015 T3 1,5 kW – 4 A J1 186x266x180 3-phase 380V
EM30-0022 T3 2,2 kW – 6,5 A J1 186x266x180 3-phase 380V
EM30-0030 T3 3,0 kW - 7 A J1 186x266x180 3-phase 380V
EM30-0040 T3 4,0 kW - 9 A J1 186x266x180 3-phase 380V
EM30-0055 T3 5,5 kW - 12 A J2 215x325x190 3-phase 380V
EM30-0075 T3 7,5 kW - 17 A J2 215x325x190 3-phase 380V
EM30-0110 T3 11 kW - 23 A J2 215x325x190 3-phase 380V
Power input
Rated input voltage 3-phase 380V~460V (+/-15%)
1-phase 220V~240V (±15%)
3-phase 220V~240V (±15%)
Вхідна частота 44…67 Hz
EMC Integrated C3 filter (industrial area),
integrated C1 class filter optional
Motor output
Output voltage 0…V-input
Output frequency 0…650 Hz
Frequency resolution 0,01 Hz
Overload capability 150% - 60 sec. / 10 min
Control Mode
Motor control algorithm V/Hz-SpaceVector, SLV-SENSORLESS VECTOR
with torque/speed control mode, CLV-Closed loop vector,
Permanent Magnet Synchronous Motor PMSM SENSORLESS control
Chopper frequency 0,8…16 kHz (fixed / random pattern)
V/Hz curve Linear, exponential, and user-programmable curve
Starting torque 150% rated torque at 0,5 Hz (in SLV Mode)
Torque compensation Automatic / Manual
Motor data input Manual, from nameplate / AUTOTUNING
Control range 1:100 in SLV mode,1:1000 in CLV mode,1:20 in PMSM mode
Speed precision +/- 0,5% (SLV), +/- 0.02% (CLV)
Torque precision +/- 5% (SLV)
DC-Brake User programmable functions
Brake chopper Chopper transistor integrated
Display
4 Line LCD Character Programmable to display parameters and parameter values,
inverter status and operating parameters
I/O Hardware
Analogue inputs 2 analogue inputs - 12 BIT: 0…10V, 0...5V, 0..(4)20 mA,
all free scalable in gain and offset,
and mathematically concatenable
Analogue outputs 2 analogue outputs, programmable in gain
and function (0…10V, 0(4)..20 mA)
Digital outputs 2 relays with switchover contacts 5A 230V capability
1 OC digital output (24V 100 mA)
Data link Serial link RS 485 (MODBUS ASCI/RTU)
Special functions
Special functions 24V / 200 mA auxiliary power supply on terminals,
10V potentiometer power supply,
5V/100 mA power supply on Modbus connector
PTC / KLIXON motor protection
Electronic protections with fault history
Electrical Over-voltage, under-voltage Over-current,
Overload, motor-overload, output short-circuit
Input phaseloss, motor phase unbalance
Thermal Heatsink overtemperature, I²xt motorprotection Motor PTC
Options
Display IP66 Remotable display / keypad units
Brake chopper Braking resistors for different load characteristics
PC-software
Parameter copy stick
Configuration-, control- an diagnosis-tool
parameter copy/duplicating stick
Environmental and operating conditions
Protection class IP66 / NEMA4 - motor- / wall mounting
Operating temperature -10…+40 °C – -40°C with automatic
antifreeze control function (option)
Humidity 0 to 98%, non-corrosive
Altitude 1000 m, above 1% derating / 100m
Standards
EMC EN61800-3 (2004)
Safety EN61800-5-1 2003
HOIST
COMPRESSOR
MINING EXCAVATOR
MINING EXCAVATOR
PACKAGING
PUMP
AIR CONDITION
LIFT
FAN
VENTILATE
WASH MACHINE
BIOGAS PLANT
BUILDING AUTOMATION
TEXTIL
HOIST